Passive POE over Coaxial Extender Kit

The IP01PK PoE over Coax Extender enables you to transmit PoE signals to any TCP/IP 10/100BaseT device using existing coaxial cables, with a transmission range of up to 984ft (300m). Being passive means it doesn’t require power. This solution is ideal for upgrading analog CCTV cameras to PoE-enabled cameras without the hassle or expense of replacing your current coaxial infrastructure. By reusing your cables, the IP01PK offers a cost-effective and efficient way to modernize your surveillance system while minimizing installation effort.

If you need basic IP transmission, the IP01K is your go-to.

SC&T also offers an active, long-distance PoE version — IP09CPK.

	IP01 Series (Passive)		IP09C Series (Active)
	IP01K	IP01PK	IP09CK	IP09CPK	IP09CPHK
PoE Standards	non-PoE	IEEE 802.3at	non-PoE	IEEE 802.3bt	IEEE 802.3at
Cable Type	Coaxial Cable	Coaxial Cable	Coaxial Cable	Coaxial Cable	Coaxial Cable
Ports	1	1	1	1	4

Transmission Distance (Up to 984ft for RG6U Cables)

The IP01PK supports transmission distances of up to 984ft (300m) when using high-quality RG6U coaxial cables.

• Transmission distance and bandwidth may vary by cables and connectors used. We recommend using high-quality 75Ω coaxial RG59, RG6U cable. 

• IP01P can support 100Mbps bandwidth only when using RG6U coaxial cables and the distance shorter than 100M. If the distance over 100M, please set the bandwidth to 10Mbps manually.

Passive Ethernet over Coax / PoE over Coax Installation & Demo

In this video, we’ll provide a complete installation guide for the IP01K and IP01PK:

• Full installation tutorial
  
• Use case demonstrations
  
• Troubleshooting for transmission issues
  
• Mid-Span/End-Span setup instructions
  
• Ethernet crossover cable use guide