Ethernet to Fiber Media Converter/Extender Kit

Up to 1000Mbps 20KM Ethernet to Fiber Media Converter

As a high-speed network fiber converter, IP01F has a built-in SC single-mode connector and can be used to extend the network over fibers for up to 20 km with a maximum bandwidth of 1G. For large projects, the long distance and high bandwidth are ideal for connecting large switches in the server room or transmitting multiple cameras or network equipment at once.

‍

Fiber Media Converter Applications

• Intelligent Transport Surveillance Systems (ITS)
• Highway traffic camera systems and telecommunication systems
• Network security systems for large companies and multifunctional systems
• Campus security camera programs, remote multimedia instruction, and remote broadcast systems

‍

Single-Mode Fiber Transmission

There are two major types of fiber optic cables: single-mode and multimode. While single-mode fiber is used for long-distance and high bandwidth transmission, IP01F is equipped with single-mode and can reach a long transmission distance of up to 20 km.

IP01F also supports 10/100/1000Base-TX and 1000Base-SX interconversion with up to 1G bandwidth and is backward compatible to reduce the cost of changing equipment.

‍

1G High Bandwidth for Long-Range CCTV Fiber Extension

Large projects usually centralize IP equipment and extend fiber from the control center to the equipment over a long distance while distributing signals.

Supposing the bandwidth consumption of a 1080p, H.264 decoded, 10fps camera is 2.1Mbps, SC&T's Fiber Media Converter with 1G bandwidth can transmit signals of 475 cameras.

‍

Applciation diagram from SC&T's real case study

‍

Free from Noise Caused by Electric Power

As power cannot be transmitted through fiber cables, using fiber cables to transmit signals can prevent the noise caused by electric power. As a result, the use of Ethernet over fiber provides you with better IP (network) signal quality and a better audio/video/networking experience.

‍

ESD Surge Protection

There are no concerns about surge damage in fiber transmission, but the metal elements may still be damaged by static electricity.

IP01F has built-in ESD protection to protect your equipment from damage caused by static electricity.

‍

Other Features

• IGMP、Jumbo frame 9K : Improve network performance during transmission.
• Half/Full-Duplex
• Plug-and-Play

‍

Multiple Installation Options

Some of the converters on the market may lack proper design for installation, resulting in chaotic cabling and equipment arrangement.

IP01F can be combined with a wide range of accessories to be installed wherever you want.

• Wall
• Din rail
• Rack