Description
Package
Specification
Downloads
The SC&T IP04R High Power PoE Repeater / Extender is a PoE (Power over Ethernet) 802.3af repeater that can extend TCP/IP signal and power for an additional 140M, and can be used as a repeater for distance greater than 140m, making it a great solution for CCTV applications using Power over Ethernet PoE.
Use an IP/PoE Extender/Repeater for Quality Ethernet Extension
Usually, an extender is used to lengthen the transmission distance of CCTV cameras. When the extended length exceeds the maximum, the signal quality will degrade significantly. Common Ethernet cables used by LANs set up in companies and homes only have a short transmission distance of 100m.
In these cases, an IP/PoE extender/repeater can help maintain the signal quality and retransmit the signal for a longer distance.
Why You Need an IP/PoE Extender & Ethernet Repeater
LAN Extension
A 100m transmission of ethernet cables falls short for large local area networks in locations like university campuses, commercial buildings, and residential buildings. This is when an IP/PoE repeater can be used to help with ethernet extension.
IP/PoE Camera Extension
IP/PoE cameras are often used with network switches, and an extender/repeater can extend the distance between cameras and switches. SC&T's IP/PoE extender/repeater series have both IP and PoE extension versions.
AV/KVM over IP Extension
An IP/PoE extender/repeater can transmit network signals from any device, and most AV/KVM extenders are network extenders that extend the distance over the network. You can use an IP/PoE extender/repeater as a network repeater when an HDMI extender over Cat5e falls short of the required transmission distance of AV over IP and KVM extension.
SC&T's IP/PoE Extender/Repeater Features
Compatible with Any TCP/IP Devices
You can use SC&T's IP/PoE extender/repeater with any TCP/IP devices in your system, such as IP/PoE cameras, LAN switches, and over IP transmitters and receivers, to transmit data and power to remote devices.
Make sure that your devices are equipped with the required bandwidth and PoE specifications.
Unlimited Number for PoE Repeater Chaining
You can connect SC&T's IP/PoE repeaters in series for an unlimited number. Each of the connected repeaters extends an additional length, which provides more possibilities for combination.
Power decreases over the number of chained devices.
Up to 1Gbps, IEEE 802.3bt Standard
SC&T's IP/PoE extender/repeater supports a data transmission rate of up to 1Gbps, allowing you to transmit data fluently.
In addition, IP04R is equipped with the IEEE 802.3bt PoE standard and can be used with most PoE devices.
Plug and Play
You need not set up the device; just plug and use it.
ITEM NO. | IP04R |
Support
Compliance | IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE802.3ab 1000BASE-T IEEE 802.3 N-Way Auto-Negotiation IEEE 802.3x Full Duplex Operation and Flow Control |
Transmission Distance | 140M@1000Mbps |
Network Bandwidth | 10/100/1000Mbps |
Jumbo Frame | 9K |
ESD Protection | Air: 15kV Contact: 8kV |
Power
Power Supply | PoE Pass-through |
Power Consumption | 1W |
Ambient Temperature
Operation | -40 to 75℃ |
Storage | -40 to 85℃ |
Operating Altitude | 2000M |
Humidity | Up to 95% |
Physical Characteristic
Dimensions | 67 x 110 x 27mm |
Weight | 180g |